# lessR version 4.5, December 10, 2025

## Major Updates

* `Chart()`: New general function for visualizing one or two categorical variables in which each level or joint level corresponds to a numerical value. Supports the standard bar chart plus interactive Plotly visualizations according to the `type` parameter: .

* `Chart()`: Parameter `type` determines the visualization form. Values include `"bar"`, `"pie"`, `"radar"`, `"treemap"`, and `"icicle"`. `"sunburst"` is also available, but pie charts with a `by` variable automatically operate as sunburst charts.

* `X()`: New general function for visualizing the distribution of a continuous variable, optionally grouped by a categorical variable. Implements the standard histogram plus additional distribution displays according to the type parameter.

* `XY()`: New general function for visualizing the joint distribution of two continuous variables or one continuous and one categorical variable, with optional subgrouping. Incorporates the standard scatterplot as the default plus additional visualizations selected via the `type` parameter.

* `BarChart()` and `PieChart()`: These established `lessR` functions now serve as aliases to the unified `Chart()` function, preserving existing user scripts while providing access to the expanded visualization framework.

* `Chart()`, `X()`, and `XY()`: New parameter `use_plotly` generates an interactive Plotly visualization in the RStudio Viewer window (sometimes in addition to the static plot in the Plots window). A core subset of Plotly features is supported, including grouping via `by`, optional fit lines (fit), confidence ellipses, bubble plots with a size variable, and full color customization.

* savePlotly(): New function for saving the most recent Plotly visualization to an HTML file. Complements the RStudio Export interface and works for any Plotly visualization created during the session.

* Flows(): New function for visualizing quantities flowing across two- or three-node structures as an interactive Plotly Sankey diagram. This name reflects the broader “data views” perspective adopted throughout lessR.


## Updates

* `PieChart()`: When used through the unified Chart() functionality, now supports the `by` parameter to generate grouped pie charts in interactive Plotly mode where results appear in the `Viewer` window.

* `X()`: For univariate density estimation, the `type="density"` naming conflict with the new `type` parameter is resolved. The density form is now selected with `kind="general"` or also values of "normal" or "both".

* `XY()`: For bubble plots, default level of `transparency` now set at 0.7 to better detect bubble overlap.

* `XY()`: Default size of plotted points made a little larger. 

* `facet1` and `facet2` parameters: Now become `facet` as a scalar or as a two variable vector.


## Bug Fixes

`style()`: When applying a color theme, default point transparency, 0.1, is now correctly retained.

`PieChart()`: Parameter `label_colors` now works.

`Plot()`: For `type="contour"`, fit line now works.

`Plot()`: For facet (lattice) scatterplots, fit line now works.

`Regression()`: ANCOVA Rsq_Press was not being computed. Now it is.



# lessR version 4.4.5, August 21, 2025

## Major Update

* `Plot()`: Time series forecasting from `ts_ahead` set to a value larger than zero is now upgraded to `fable` functions `ETS()` for exponential smoothing forecasting and `TSLM()` time series linear regression forecasting along with other functions from the `fpp3` ecosystem as documented at https://otexts.com/fpp3.
  + New parameter `ts_source` defaults to `"fable"` but can assume the value of `"classic"` for standard `HoltWinters()` exponential smoothing or linear regression with seasonality first removed and then added back in.
  + Parameters `ts_trend`, `ts_seasons`, and `ts_error` redefined to accept values of `"A"` for additive effect, `"M"` for multiplicative effect for `ETS()`, and `"N"` for no effect, as well as `"Ad"` and `"Md" for `ETS()`. Enter  `?Plot`  to view the manual for the details. 


## Updates

* `sort_by()`: Deprecated function removed, replaced by `order_by` to avoid name conflict with Base R which recently took over that name.

* `order_by()`: Allow to process the alternative data frames called tibbles from the tidyverse. 

* `PieChart()`: Add a blank line after the title of the pie chart to provide more separation from the title and the chart itself.

* `Plot()`: Changed parameter names so that all parameter names applicable to time series analysis begin with `ts_`.
  + `ts_stack` instead of `stack`. 
  + `ts_area_fill` instead of `area_fill`. 
  + `ts_area_split` instead of `area_split`. 
  + `ts_n_x_tics` instead of `n_date_tics`. 

* `Plot()`: For the time series unit parameter, `ts_unit`, submitted value is now checked to make sure it is valid, for example, `"days"` instead of `"daily"`.

* `Plot()`: For the time series unit parameter, `ts_fitted`, now the `y` data value is also displayed along with the `x`-date value, and the fitted value, and the level.

* `Plot()`: For a forecast from a time series plot, with parameter `ts_ahead`, plotted forecast colors follow the style theme, with a default of red for the default `colors` theme.

* `Plot()`: For a forecast from a time series plot, with parameter `ts_ahead`, more vertical spacing between the legend elements: data, model fit, and forecast.

* `Plot()`: For a time series analysis with a `by` variable, the data are now sorted by that variable implicitly instead of requiring sorting before the analysis.
 
* `Plot()`: For trellis (faceted) plots, if a date variable, now the name of the date variable is displayed because converting it to `NULL`, as with the previous procedure, just leaves a blank space without compressing the space. 

* `STL()`: Saving the output visualization to a PDF file is now possible with new parameters `pdf_file`, `width`, and `height`.

* `STL()`: Output object data frame now includes the data as well as the trend, seasonal, and error components. 

* `STL()`: Output object data frame now includes the formatted dates according to their unit, e.g., "2020 Q1" instead of 2020-01-01 for quarterly data. 


## Bug Fixes

* When writing a data frame to a data file, if the file specification includes a path name, the result displayed at the console now correctly reflects that specification.

* `interact("BarChart")`: Selecting a numeric variable from which to compute statistics such as the mean as the `y` variable for the bar chart now works after previous change to `BarChart()` parameters.

* `interact("Histogram")`: Density plots now work again after previous change to `Histogram()` parameters.

* `Plot()`: Parameter `n_axis_y_skip` now works for time series trellis or faceted plots.

* `Plot()`: For the now `classic` time series forecasting with the regression, if seasonality is specified without trend, the fitted and forecasted values are now properly adjusted for the overall level of the time series. 

* `train_test()`: Data frames now can be processed with any valid name, not just `d`.


# lessR version 4.4.4, June 16, 2025

## Updates

* `Density()`: Old, deprecated function deleted. Use `Histogram()` with `stat` set to `"density"`.

* `Histogram()`: Parameter `stat_x` changed to `stat`.

* `Histogram()`: Parameter `density` dropped and is now a value of parameter `stat`. Specify `stat="density"` in place of `density=TRUE`.

* `Histogram()`:  When `stat` is `density`, the density curve is plotted from the first value of the estimated density until the last value without extending the $x$-axis further.

* `Histogram()`: When `stat` is `density`, the `line_width` parameter added.

* `Histogram()`: When `stat` is `density`, parameter `x.pt` changed to `x_pt`.
 
* `Plot()`: For bubble plots, where the `size` of the plotted points varies according to the values of a specified variable, legend is now displayed.

* `Plot()`: Two new parameters for Trellis (facet) plots: `n_axis_x_skip` and `n_axis_y_skip`. Trellis or facet plots are based on functions from the lattice package where the axis tick labels are prone to overlapping and becoming unreadable, nor does lattice automatically delete overlapping labels. The default value of 0 directs to include all the axis tick labels. A value of 1 indicate to skip every other label. A value of 2 indicates to skip every second label, and so forth. 

* `Plot()`: For Trellis (facet) plots, any combination of variables for parameters `by`, `facet`, and `facet2`, result in the corresponding pivot or summary table displayed at the R console. If the output is saved into an R object, the name of the pivot table is `out_ pivot` for later reference. Also, the pivot tables for the levels of each source separately are also provided, named `out_by`, `out_facet1`, and `out_facet2` if present in the analysis.
 
* `Plot()`: For the generated pivot table from Trellis (facet) plots, the new parameter `n_min_pivot` specifies the minimum sample size for a group for the corresponding row to be displayed. The default value is zero for all rows to be displayed.

* `Plot()`: For Trellis (facet) plots with a `by` variable plotting points with multiple colors in the same box, the box color now is automatically modified with transparency.

* `Plot()`: Parameters `fill`, `color`, and `shape` can now be named vectors. That is, specify the categorical value from the `by` variable that is assigned to the specific visual aesthetic. For example, for `by=Gender`, `fill=c(M="plum", W="green").

* `Plot()`: New parameter `contour_points`. If `TRUE`, then plot the points in the scatterplot, the data from which the contour curves are estimated. 

* `Plot()`: Parameter name `vbs_size` changed to `vbs_ratio` to be more descriptive of its meaning.
 
* `Plot()`: For `type="smooth"`, the parameter name `smooth_exp` is changed to `smooth_power` to more accurately described the underlying transformation.
 
* `Plot()`: For `type="smooth"`, the smoothed scatterplot now starts with a darker center.

* `Plot()`: For two-variable Cleveland dot plot of differences, the legend is now written in the right margin.

* `Plot()`: For Trellis (facet) plots, when there is a `by` variable, the outliers are now displayed in their regular color for the `by` variable. Otherwise, displayed them and red obscures their group.

* `Plot()`: For box plots, unless grayscale, to provide more emphasis fences are now drawn in `darkred` instead of gray with a line width of 2 instead of 1.


## Bug Fixes

* `Histogram()`: When `density` is `TRUE`, `type` is `"normal"` and `theme` is `gray`, then the normal curve is now filled with a transparent light gray instead of not having to fill color.

* `Plot()`: For Trellis (facet) plots, when there is a `by` variable, the outliers now plot with a fill color.

* `Plot()`: For Trellis (facet) plots, when there is a `by` variable, the legend title and legend text now respond appropriately to adjustments to `style()` parameter `axis_cex`.

* `Plot()`: For box plots, including embedded in VBS plots and Trellis (facet) plots, outlier labels now work when `out_cut` is specified was a value greater than zero. Only outlier points are labeled. 

* `Plot()`: For VBS plots as a single panel (not Trellis or facet), statistical output at the console is now restored.

* `Plot()`: For Trellis (facet) plots that are not VBS plots with a `by` variable, the legend title and text now are the correct sizes.

* `Plot()`: For Trellis (facet) plots or VBS plots, that is, use of the lattice package functions, saving PDFs now happens directly instead of first needing the application to close.



# lessR version 4.4.3, May 8, 2025

## Major Update

* `Plot()`: Contour plots now available. Older logical parameter `smooth` for smoothed scatterplots now replaced with parameter `type`, now can set to `"smooth"` or `"contour"`. Fit line and ellipse are also available.

* `Plot()`: Two new parameters:
  + `contour_n` specifies the number of levels or contours for a specific contour plot. The default value is 10. 
  + `contour_nbins`: Specifies the number of bins constructed for the \code{x} and \code{y} variables from which to form the 2D grid of estimated densities.


## Updates

* `BarChart()`, `Histogram()`, `Plot()`: New parameters for formatting axis values, which can be combined.
  + `axis_fmt`:  default is `K`, which rounds 100000 to 100K, also can specify `,` for standard USA format of numbers or `.` for the format used in many other parts of the world. 
  + `axis_x_pre`: specify a prefix to add to each displayed number on the `x`-axis, such as `$`.
  + `axis_y_pre`: specify a prefix to add to each displayed number on the `y`-axis, such as `$`.

* `BarChart()`, `Histogram()`, `Plot()`: Parameter `filter` now works, in addition to the existing logical selection, by specifying a vector of integers that correspond to the row numbers of the input data frame to be retained. 

* `BarChart()`: New parameter `fill_scaled` by default sets the luminous (lightness) of each bar along a sequential scale scaled according to the value of numerical `y`. Larger values of `y` lead to darker colors. Only applies if no`by` variable. Or, specify the color of the sequential scale with parameter `fill` set to a single R color name, or a divergent scale with parameter `fill` set to two R color names.

* `BarChart()`: New parameter `fill_chroma` sets the saturation level of fill colors for parameter `fill_scaled`. Default is full saturation 100. Values closer to 0 lose saturation to he come closer to grayscale.

* `Correlation()`: Parameter `show_n` dropped and replaced with parameter `show`, which has a different meaning. For a data frame, the default value is `cor` to compute correlations. The other possible value is `missing` to compute the missing data matrix for pair wise deletion or general information for the other forms of deletion. No longer extract the correlation matrix or the missing matrix from the output as a list value, e.g., R <- mycor$R.

* `Correlation()`: To be consistent with other lessR functions, logical parameter `pdf` changed to `pdf_file`, where the name of the PDF file is specified.

* `corPrint()`: New function to display a correlation matrix in readable, compact form. Drop the `0.` characters of each correlation coefficient. For example, display 0.42 as 42. Parameter `min_value` specifies the minimal magnitude for which to display a correlation. 

* `corReorder()`: Do not write the output correlation matrix to the console if new parameter `quiet` is TRUE.

* `reshape_long()`: New parameter `shape` that when set to `square` transforms a symmetric, square matrix such as a correlation or covariance matrix into a long-form data frame.

* `reshape_wide()`: No longer use quotes around the variable names.

* `reshape_wide()`: Change parameter name `group` to the more descriptive `widen`, the categorical variable for which the levels are displayed as columns.

* `Histogram()`: When a density rug in specified with parameter `rug`, the tick marks that define the rug are now longer with the entire density curved moved upwards to accommodate. 

* `pivot()`: All categorical variables to define groups over which to aggregate now should be specified as part of parameter `by`. For example: `pivot(d, table, by=Dept)`.  

* `pivot()`: Parameter `table_long` now defaults to `TRUE`.

* `Plot()`: Parameters `scale_x` and `scale_y` can now be specified with just two values, the respective minimum and maximum values of the corresponding axis. If the third value, the number of intervals on the axis, is not specified, the default value is accepted. 

* `Plot()`: Parameter `sort_yx` renamed `sort`, though the old name still works. 

* `ttest()`: Parameter `pt_size` added to specify the size of plotted points for the dependent-groups t-test of paired differences Cleveland dot plot. 


## Bug Fixes

* `BarChart()`, `Histogram()`, `Plot()`: Setting `x` as `row_names` now works with parameter `filter`.

* `Histogram()`: Vertical grid lines restored to the histogram plot.

* `Plot()`: Violin plot fill color now appropriately reflects the underlying style from `style()`.

* `Plot()`: For facet plots with a `by` variable, the legend text now scales according to the size of the text of the axis values.

* `Plot()`: `add="labels"` now working to use row names by default to label the points in a scatter plot.

* `Plot()`: Run chart, indicated by `.Index` for the `x`-variable, now properly responds to the `color` parameter set for the line color and point border. 

* `Plot()`: `ID` parameter now working correctly to identify the variable from which to label plotted points. 

* `ttest()`: Visualization for the resulting density plots now responsive to changes in axis and labels text per `style()` function.



# lessR version 4.4.2, March 16, 2025

## Updates

* `BarChart()`: Parameter `legend_abbrev` changed from default of no abbreviation to 10 characters for each line of the legend.

* `BarChart()`: The size of the legend title font is now 10\% larger than the font for the legend items.

* `BarChart()`: Parameter `legend_abbrev` changed from default of no abbreviation to 10 characters for each line of the legend.

* `BarChart()`, `PieChart()`: Parameter `labels_decimal` standardized across the two charting functions, now defaults to 0 if only integer labels are to be displayed or percentages, 0 if input values are to be displayed, and 2 for proportions.

* `Read()`: Added the `.prn` format for "print", a space-delimited text file, with each data value separated from adjacent data values by one or more spaces.

* `Read()`: Default missing value parameter `missing`, which applies to text files, changed from `""` to a blank space, `" "` for `.csv` and `.tsv` files and `NA` for `.prn` files.

* `Read()`: Reading data files in `feather` or `parquet` format now returns an R data frame instead of a tibble.

* `Plot()`: For facet plots of a time series, the label for the x-axis is deliberately not displayed, consistent with the non-facet time series plots. The label is not needed with the descriptive access labels provided, such as `Aug 2024`.

* `Plot()`: Scale the bubble size according to the power of 0.55 by default for BPFM, bubble plot frequency matrix, which yields a bubble plot of counts for one to the specified number of categorical variables. 

* `Plot()`: For a BPFM, and a bit more space between the axis-value labels and each axis.

* `Plot()`: When plotting two `x`-variables for individual rows of the data table, the differences between the corresponding values row-by-row are now displayed.

* `Plot()`: Parameter `lab_adjust` for overwriting the default position of an axis label is now named the more descriptive `label_adjust`. 

* `Write()`: Added parameters:
  + `missing` added to specify missing data value, with default a blank space for `.csv` and `.tsv` files and `NA` for `.prn` files.
  + `dec` added to specify the character for the decimal point, defaults to a period. 
  + `sep` added to define the  character that separates adjacent data values, which defaults to the character consistent with the corresponding file type.
  + `quote` added to specify if character data values should be quoted. Extending the Base R function `write.table()`, the default value is `if_needed` so that character strings that consist of a single word with no spaces, tabs, and related are not quoted because the quotes are not needed, simplifying the output file.
  + existing `readNames` parameter added to `write_ods` internal call for ODS files.

* `Write()`: Added formats:
  + `.prn` "print" or space-delimited text file
  + `.tsv` tab delimited text files.
  + `.txt` the new default, permits the user to specify the `sep` parameter (as well as `dec`) to provide a more flexible write format, which respectively default to `"` and `"."`, that is, standard North American `csv` format.

* `Write()`: Required to specify either the file type or the format. The following two statements are equivalent: `Write(d, "GoodData.xlsx")` and `Write(d, "GoodData", format="Excel")`. `Write(d, "GoodData")`  defaults to `GoodData.csv` and `Write(d)` defaults to `d.csv`.

* `Write()`: For consistency with `Read()`, parameter `rowNames` change to `row_names`.

* `Write()`: Row names are now preserved for `.feather`, `parquet`, and `.sav` files where otherwise these formats loose the row names when the data file is written. The strategy is to move the real names into a variable in the first column named `RowName`. Also, when read back into R with `Read()`, if the first column has that name, then it is shifted into the row names. 


## Bug Fixes

* `Plot()`: A minor issue, but when plotting a line chart for multiple levels of a categorical variable, the legend displayed the levels as points instead of lines. Now lines are displayed. 

* `Plot()`: With a `by` variable, the `shape` specification `shape="vary"` to automatically vary the shape of the point for each group did not display the additional shapes in the legend. Now all shapes are properly displayed.

* `Plot()`: For some two-dimensional scatter plots with a fit line, the axes did not accommodate the full fit line. Now they are expanded to do so.

* `Plot()`: When plotting a BPFM, bubble plot frequency matrix, which yields a bubble plot of counts for one to the specified number of categorical variables, the text plotted in each bubble could not be changed in size. Now the `labels_size` properly provides that control.

* `Plot()`: When the `x`-axis variable was sorted with equal intervals between adjacent points, sometimes neither points nor connecting line segments plotted by default, so needed to manually set the `size` parameter for the size of the plotted points or `line_width` for the width of the plot line segments. Now fixed.


# lessR version 4.4.1, February 3, 2025

## Updates

* `BarChart()`, `Histogram()`, `Plot()` for facet plots: Axis tick lengths are now smaller, to match the lengths for non-facet `Plot()` visualizations.

* `Plot()`: Parameter `lwd` renamed `line_width`. Parameter `ts_PIlevel` renamed `ts_PI`.

* `PieChart()`: Parameter `lwd` renamed `line_width`. Parameter `lty` renamed `line_type`.

* `Plot()`: To jitter either axis coordinate, set to a specific value of `jitter_x` and/or `jitter_y` or have the value set by `Plot()`, indicated by setting the corresponding jitter parameter to `NULL`. Applying jitter to both the `x`-axis and `y`-axis was by design occurring by default for all analyses, probably too aggressive. Now, the default values for a scatterplot of continuous variables is 0. For discrete variables or a VBS plot (violin-box-scatter plot), different formulas provide default jitter values greater than 0, easily overridden by providing specific values.

* `Plot()`: For non-linear values of parameter `fit`, now provide the MSE of the model fit to the original, non-linear data. Can compare this MSE to that of the linear model by running another analysis, setting `fit` to `"lm"`.

* `Plot()`: New parameter `fit_new` to provide values of the `x`-variable from which to compute (predict) values of the `y`-variable for linear and non-linear forms specified by the `fit` parameter, except for `"loess"`.

* `Plot()`: As with `origin_y` from the previous `lessR` version, the default value of `origin_x` favors 0 if there is not too much resulting blank space in the corresponding visualization. Or, manually specify the desired parameter value.

* `Plot()`: For Trellis (facet) plots, axis values in the even hundred thousands are now expressed in `K` notation, such as 100K instead of 100000, a feature previously added to non-facet plots.

* `Regression()`: The criteria for plotting points as bubbles for a single predictor model was deemed too encompassing. The new criteria are to plot as bubbles by default only when the single predictive variable and the target variable have less than or equal to 12 unique values. Boolean parameter `bubble_plot` added to override default for displaying the scatterplot of the one predictor variable with the target variable as a bubble plot.

* `Regression()`: Parameter `size` added to override default for the size of plotted points.


## Bug Fixes

`Histogram()`: Axis labels were written too far from the corresponding tick marks.

`Plot()`: A one-variable categorical variable coded as a factor can now be plotted as a bubble plot. If the categorical variable is numerical, add a value of the `radius` parameter to force as a bubble plot instead of a VBS plot.

`style()`: Transparency now properly recognized with `add_fill` colors with specified transparency from `add_trans` parameter.

`style()`: Default fill for a superimposed rectangle on a visualization with `style(add="rect")` changed to light gray with light transparency to allow content within the rectangle to be viewed, `"#D9D9D920"`.


# lessR version 4.4.0, January 12, 2025

## Major Update

* `Plot()`: New parameter `ts_method` to specify the estimation method for generating a forecast. The default is `"es"` for exponential smoothing, the only available previous method. Can now also implement `"lm"` for least squares linear regression model with seasonality, which de-seasonalizes the data and then adds seasonality back to the estimated regression line.


## Updates

* `Plot()`: To generalize parameter names for multiple estimation methods, all parameters that began with `time_` and `es_` now begin with `ts_`. For example, `time_unit` is now `ts_unit`, and `es_seasons` becomes `ts_seasons`.

* `Plot()`: New parameter value `days7` for `ts_unit`. All other time units are based on the 365 or 366 day year, the interval over which seasons are assessed. Seasonality for `days` is not generally meaningful assessed over the entire year but can be for days of the week. The time unit of `days7` assesses seasonality of days over the 7-day week, such as, for example, more sales on Monday than on Sunday.

* `Plot()`: New parameter `origin_y` to set the minimum value of the `y` axis, though the data will not be truncated if the value is larger than the smallest `y` value, instead triggering an error. This parameter compliments existing parameters `origin_x`, and also `scale_y`, which sets the minimum, maximum, and interval for scaling the `y` axis. Its value is set to 0 by default in relevant situations.

* `Plot()`: New parameter `ts_NA` to specify treatment of missing values for the `y`-variable. By default, `y` missing values, those with value `NA`, do not plot, leaving a blank space. Or, specify a value such as 0 to replace the `NA` to plot that `y`-value for the corresponding date on the `x`-axis.

* `STL()`: Output data structure provided that consists of four variables: date according to the named date variable and the extracted trend, season, and error components. Example: s <- STL(Qtr, Sales) outputs to the data frame `s`.


## Bug Fixes

* `pivot()`: When computing a cross-tab table, if the first variable was a factor the analysis would crash. Now fixed.

* `Plot()`: When plotting a time series, x-axis tic lengths and the margin for value labels is refined.

* `Plot()`: Refined the extraction of the date variable and the `y` variable from a time series used in internal processing, such as identifying leap years to provide more generally accurate dates.

* `Plot()`: When plotting a time series with multiple `y` values, the `y`-axis label now properly displays.

* `Plot()`: When plotting a stacked time series, the vertical legend now displays with the proper colors and in the same order as the display of the stacked variables.

* `Plot()`: If plotting daily data with a time unit of `"weeks"`, then dates are plotted as individual dates by days instead of months.

* `Plot()`: If plotting a `y` categorical variable and an `x` continuous variable, the number of decimal digits for the displayed statistics is now based on the decimal digits inherent in the continuous variable instead of set at 1.


# lessR version 4.3.9, December 8, 2024

## Updates

* `Plot()`: For a time series exponential smoothing forecast, now display SSE and MSE fit indices, the linear trend and seasonal coefficients, and the obtained smoothing parameter values.

* `Plot()`: Improved conversion of character string numeric dates to R type Date.

* `Plot()`: Read dates entered as character strings formatted as:
  + "year quarter" where quarter is "Q1" through "Q4", e.g., "2024 Q3"
  + "year month" where "month" is a three-letter abbreviation, e.g., "2024 Apr".

* `Plot()`: Forecasting output now written to an output list object such as `p <- Plot(...)` with names out_frcst, out_fitted, out_coefs, and out_params. This output is accessible for showing just part of the output, such as `p$out_frcst` when writing R Markdown documents from the results.

* `STL()`: Set parameter `show_range` to `TRUE` to show the range of each component. Before `TRUE` was the default.

* `STL()`: Parameter `quiet` added to suppress text output and parameter `do_plot` added to suppress the visualization.


## Bug Fixes

* `Plot()`: Exponential smoothing of multiplicative models now working, indicated by `es_type="multiplicative"`.

* `Plot()`: Can set `style(suggest=FALSE)` for a time series plot.

* `Plot()`: If missing data for a run chart, a proper error message is now displayed if attempting to show the runs, for which missing data does not work.

* `Plot()`: Turn off the plot with `do_plot=FALSE`, leaving only text output, now works.

* `Plot()`: If plotting a run chart with multiple `y` variables, adjacent points are now connected with line segments for each of the `y` variables. Example: `Plot(.Index, c(y1,y2,y3))`.


# lessR version 4.3.8, October 7, 2024

## Major Updates

* `Plot()`: Exponential smoothing forecasting implemented with accompanying visualization. New parameters include `time_ahead` for the number of `time_units` to forecast into the future, and `time_format` to provide a specific format for the date variable if not detected correctly by default. Control aspects of the exponential smoothing estimation and prediction algorithms with parameters `es_level` (alpha), `es_trend` (beta), `es_seasons` (gamma), `es_type` for additive or multiplicative seasonality, and `es_PIlevel` for the level of the prediction intervals.

* `Plot()`: Character string versions of a date as in a variety of forms as digits, such as "08/18/2024", are now by default converted to variable type of `Date`. However, this conversion is inherently ambiguous, so the `time_format` parameter is provided as a means to provide the precise format if needed, including other formats such as "August 18, 2024". Also, a sequence of four-digit integers within the usual range of dates will also convert automatically to a variable of type `Dates.

* `STL()`: A wrapper for Base R `stl()` that provides additional information and utility:
  + allows input data as two columns, a variable of type `Date` as the `x`-variable and the time series values as the `y`-variable instead of an R time series.
  + If the dates are character string digits (see above), they are automatically converted to a variable of type `Date`.
  + The function also assists in comparing the magnitude of each extracted effect by showing the proportion of variance explained for the trend, seasonal effect, and error.


## Updates

* `BarChart()`, `Histogram()`, `Plot()`: If the `x`- or `y`- axis values in the resulting plots all end in 000, then the 000 is replaced with a K, such as `120000` plotted as an axis value of `120K`.

* `LineChart()`: Deprecated for years, now removed as its functionality has been incorporated into `Plot()` and extended with the `x`-variable of type `Date`.

* `Plot()`: Parameter `run` dropped. Instead, to maintain the position of the variable of interest to be plotted, as the `y`-variable, indicate a run chart by specifying `.Index` as the `x`-variable, that is, the first variable listed. That name, beginning with a period, `.`, indicates data values for the variable Will be created automatically.

* `Plot()`: Increase the default size of the dot in the Cleveland dot plot and related.

## Bug Fixes

* `Plot()`: When parameter `time_unit` is explicitly set, proper dates are now displayed on the x-axis when there is a `by` variable.

* `Plot()`: Suggestions are working. To turn off: `style(suggest=FALSE)`.


# lessR version 4.3.7, August 21, 2024

## Updates

* `BarChart()`, `Histogram()`, `Plot()`: Parameter names `by1` and, where applicable, `by2`, deprecated, replaced with more descriptive new names `facet1` and `facet2`.

* `Plot()`: Using functions from the xts package, when plotting a time series dates are now formatted according to their natural unit. For example, when plotting by years, just years are listed without the month and the day.

* `Plot()`: When plotting a times series and requesting a level of time aggregation with the `time_unit` parameter that is more detailed than the available data, the analysis appropriately terminates with an error message. For example, if the time series data is monthly and an aggregation of `weeks` is requested, no analysis is done.

* `Plot()`: For plotting time series data, new parameter `n_date_ticks` added to override the default number of ticks on the `x` axis, the date axis.


## Bug Fixes

* `Plot()`: For Trellis (facet or lattice) plots of bar charts and histograms, each panel is labeled with the proper size of text in the corresponding panel strip.


# lessR version 4.3.6, June 22, 2024

## Updates

* `vignettes`: These extensive examples are moved to the web to save space as the installed lessR was exceeding the accepted maximum limit. The web address is given from `library(lessR)`.

* `BarChart()`: When doing a composite plot, if calling `fill=getColors(...)` for a divergent palette, such as for one bar for all items on an attitude survey, no longer need to explicitly add `n=` for the number of levels.

* `getColors()`: Added three pre-defined palettes from the `colorpace` package: `rainbow_hcl`, `terrain_hcl`, and `heat_hcl`, e.g., `getColors("rainbow_hcl")`.

* `getColors()`: Adjusted the margins to better fit the plot window when the color wheel or rectangle is displayed.

* `getColors()`: Default Tableau qualitative palette added as a name to recognize and translate to the colors, also for visualization functions, such as `fill="Tableau"`.

* `Plot()`: New parameter `time_unit` for when the x-variable is a `Date` variable and a time series is plotted with automatic aggregation of the time unit according to the specified value, such as `"years"` plotted from daily dates.

* `Plot()`: New parameter `time_agg` for when the x-variable is a `Date` variable and a time series is plotted with automatic aggregation to specify the type of aggregation with `"sum"` the default.

* `Plot()`: Pearson correlation analysis no longer displayed if the x-variable is a date, that is, if a time series is plotted.

## Bug Fixes

* `all visualizations`: Grid lines not affected in some plots that would add some unintended transparency to the visualizations.

* `PieChart()`: User now warned that the `values` family of parameters is changed to `labels`, though the old reference still will work.

* `Read()`: If `quiet=TRUE`, automatically modified variable names to legal R names are not reported.


# lessR version 4.3.3, May 9, 2024

## Updates

* `all visualizations`: Default colors softened a bit with default `transparency` level moved from 0 to 0.10.

* `ANOVA()`, `BarChart()`, `Histogram()`, `PieChart()`, `pivot()`, `Plot()`, `Regression()`, `ttest()`: Parameter `rows`, for subsetting data, deprecated, now named `filter` to be more consistent with other systems, although `rows` parameter removed entirely for `ANOVA()`, `pivot()`, Regression()`, and `ttest()` to avoid needing the `rows` parameter as part of the function definition in addition to `filter`.

* `BarChart()`, `Histogram()`, `PieChart()`, `Plot()`: Parameter `filter` (formerly `rows`), now reports the number of rows of data before and after the filtering along with the logical statement that defines the filter.

* `BarChart()`: Default family of `values` parameters now called `labels`, such as `labels_color`, to be more consistent with other systems.

* `BarChart()`: `values_digits` now `labels_decimals` though old value still works.

* `BarChart()`: Default `labels` (formerly `values`) that are labeled on each bar now set at `input` except when aggregating counts, where it remains at `%`.

* `BarChart()`: When `labels` is set to `input`, default decimal digits is now 2, which can be customized with `labels_digits`.

* `BarChart()`: Default `labels` (formerly `values`) that are labeled on each bar now set at `input` except when aggregating counts, where it remains at `%`.

* `Plot()`: Parameter `area_fill` on time series plots now extends down to the level of the y-variable specified with `scale_y` instead of the minimum value of y.

* `Plot()`: Binning large data sets now results in larger bubbles.

* `dataStockPrice`: Data table updated with stock prices through May 2024, and trading volume added as the fourth variable.

## Bug Fixes

* `BarChart()`: For an unstacked or grouped bar chart, `beside=TRUE`, if there is missing data for the `by` variable, the color distribution across the bars is now consistent across levels and with the legend.

* `BarChart()`: For two categorical variables, `x` and `by`, evaluation if input data is a summary (pivot) table of a prior aggregation is now correctly computed.

* `interact()`: User-written functions are able to again use `BarChart()`, `Histogram()`, `PieChart()`, and `Plot()`.

* `pivot()`: Output variable names now consistently labeled: variable_stat, e.g., Salary\_mean.

* `Plot()`: Shapes now properly plot with a `by` parameter stratifying according to the specified categorical variable.

* `Plot()`: `by1` parameter for Trellis (facet) plot with `fit` line specified now properly does not display text output when `quiet=TRUE`.

* `reshape_wide()`: After the transformation, all other variables except those specified as the group, response, or ID are deleted as their values are not evenly distributed over the new wide format variables.


# lessR version 4.3.2, Apr 07, 2024

## Updates

## Bug Fixes

* `pivot()`: Fixed a bug on the output. The results were correct but not formatted correctly.


# lessR version 4.3.1, Mar 26, 2024

## Updates

* `BarChart()`: Parameter `stat_x` added to specify how to plot the `y`-axis if there is no `y` variable specified, with default value of `counts` and option `proportion` or `%`. These values are separated from the `stat` parameter which now exclusively pertains to the transformation of a specified `y` numerical variable.

* `BarChart()`, `Histogram()`, `Plot()`: Parameters `lab_adj`, `margin_adj`, and `legend_adj` renamed for clarity to `lab_adjust`, `margin_adjust`, and `legend_adjust`.

* `pivot()`: When pivot table is of counts, using function `table`, the values of `n` and `na` are now listed last in the resulting pivot table.

* `Plot()`: `shape` parameter default for multiple groups according to parameter `by` returns to `"circle"` with the new `shape` value `"vary"` if desired to retain a sequence of default shapes across the different groups.

* `Plot()`: `fit` parameter now set only to the values that it can analyze such as `lm`, so no longer can be set to TRUE or FALSE.

* `Read()` and `Write()`: Support the modern, fast, and efficient data file formats from the `arrow` package, `feather` and `parquet`.

* `details()`: Shows the proportion of all missing data values in addition to the total, and displays each row of data with missing data, also obtained with `Read()` when `brief=FALSE`.

* `details()`: `miss_zero` parameter removed.

* `rename()`: Parameter `to` can now specify a vector of names to change, with the corresponding `from` vector of new names.

## Bug Fixes

* `BarChart()`: If a numerical y variable is specified for analysis of the original,raw data, then if a value of the `stat` parameter is not specified its value now defaults to `"mean"`.

* `Plot()`: If a time series is plotted from a x-axis variable that is not of type `Date`, then, setting `segments=TRUE` connects the points (which can vanish if `size=0`), but the line width parameter `lwd` was previously not responsive in this context.


# lessR version 4.3.0, Nov 11, 2023

## Updates

* `Logit(), Regression()`: For categorical predictor variables, the conversion to indicator variables now happens before the analysis. All analyses are now only of numeric variables so that the correlation matrix, scatterplot matrix, tolerance, and best subset analyses are now conducted for categorical predictor variables.

* `Logit(), Regression()`: Redundant predictor variables that lead to a singularity is now detected and noted instead of the function crashing.

## Bug Fixes

* `Logit()`: For sigmoid function plot for a single predictor model, right-hand margin adjusted to better display labels of the target variable of varying lengths.

* `Regression()`: For the model fit section, the displayed standard deviation of the response variable is now computed from the same data from which the model was estimated, which can differ depending on missing data.



# lessR version 4.2.9, May 14, 2023

## Updates

* `BarChart()`: Missing data is now permitted for the numerical or `y` variable.

* `pivot()`: Aggregated variables are named the original name of the aggregated variable concatenated with an underscore and the name of the operation.

* `Plot()`: For plots of two or more variables, the right-margin legend is displayed with a smaller font size and centered more effectively.

* `prob_norm()`: Function terminates if value of `lo` is greater than `hi` instead of returning a meaningless result.

* `getColors()`: Default for parameter `output` is `TRUE` only for a direct call from the console. If embedded in a function call such as for the `fill` parameter, or even if directly called in R Markdown, then set `output=TRUE` to view the calculated. palette

## Bug Fixes

* `BarChart()`: Parameter `theme` now works.

* `getColors()`: Now can be called directly in R Markdown documents though specify `output=TRUE` for output to be displayed.

* `pivot()`: Parameter `out_names` now works if the assigned name for a single variable analysis contains the name of the variable analyzed from the input data frame.

* `Plot()`: For stacked time series plots, default for `size` of points is now 0.

* `Plot()`: For lattice plots, if there is only a single point to plot in a panel, just the point is plotted instead of also attempting to plot a violin and a box plot, which necessarily fails.


# lessR version 4.2.8, March 21, 2023

## Updates

`Plot()`: Variable and axis value labels increased in size for R Markdown and R by itself analyses.


# lessR version 4.2.6, Feb 13, 2023

## Updates

* `ANOVA()`, `BarChart()`, `Histogram()`, `Plot()`, `Regression()`, `ttest()`: A tibble that is not in the user workspace, instead in a package, is now properly converted to a standard R data frame upon which the internal function's code depends, which also permits more flexibility in the packaging of data in general to these functions, such as with the pipe operator.

* `ANOVA()`: Overall p-value now available for the one-way ANOVA as the statistic in an output object, called `p_value`, such as output object `a$p_value` in `a <- ANOVA( ... )`.

* `getColors()`: To address color blindness, the `Okabe-Ito` color palette was added, and available as a `fill` parameter in `Plot()` and `BarChart()`.

* `interact()`: To address color blindness, the `viridis` and `Okabe-Ito` were added as qualitative palettes, such as for the bars of a bar chart.

* `sort_by()`: New name for the `Sort()` function, now deprecated, to maintain consistency of lower-case functions being utility functions.

* `Plot()`: For Trellis plots, indicated with `by1` and `by2` parameters, assessment of replications of unique values is done only if 1000 or fewer unique values to save both space and compute time for information that is not of such value anyhow.

* `Plot()`: For a run chart, parameter `run=TRUE`, the successive points in the plot are now by default joined with line segments, which can be stopped by setting parameter `segments=FALSE`.

* `Plot()`: Parameters `lab_cex` and `axis_cex` for size of value labels and axis labels, scaled smaller for visualizations in R run alone, without RStudio.

* `Plot()`: To address color blindness, when there is a `by` grouping, default is now to not only vary the fill color but also the shape of the plotted points.

* `Regression()`: Parameter `mod` for moderation analysis in a two-predictor model added.

* `ttest()`: Parameter `quiet` added to turn off text display at the console if set to `TRUE`.

* `order_by()`: Old function name was `sort_by()`. However, Base R now has a function with that name, so to avoid confusion, the `lessR` function was renamed to `order_by()`.

## Bug Fixes

* `ANOVA()`: One-way ANOVA with parameter `graphics=FALSE` now works.

* `BarChart()`, `Plot()`: Qualitative color palette `hues` was the default for the default color theme, `colors`, but now also works explicitly when specified as the value for the `fill` parameter.

* `BarChart()`: Now works for `color` parameter specified as a vector.

* `interact()`: Interactive analyses resets label and axis plot sizes to larger, now set back when saving the pdf and also when re-plotting.

* `PieChart()`: Suggestions for alternative analyses had wrong lowercase expression `piechart()` instead of `PieChart()`.

* `Plot()`: With a linear fit line, b0 and b1 now reflect the specified number of digits according to parameter `digits_d`.

* `Plot()`: For  plotting a continuous and a categorical variable scatterplot, when listing the continuous variable first, the name of the categorical variable is now listed in the title of the text output.

* `Plot()`: For a run chart with parameter `run=TRUE`, parameter `scale_x` now properly allows for a custom set of ticks for the `Index` on the x-axis.



# lessR version 4.2.5, Jan 5, 2023

## Primary Update

* `Histogram()`, `Plot()`, `Correlation()`, `ttest()`: Vastly speeded up for data sets much over 500 data values, substantial improvement on large data sets.


## Updates

* `Plot()`: Parameters `jitter_x` and `jitter_y` are reset for the scatterplot (not VBS plot) to explicitly set the amount of jitter within the negative and positive values of their assigned values, or, set to `NULL` to activate the default value of the range of the variable divided by 50.

* `Plot()`: Text output for Mahalanobis distance more nicely formatted.

* `interact()`: Reading of text files was not detecting blank data values for variables of type `character` as missing, which now it does.

* `interact()`: Various revisions of the interface styles and efficiency increases.

* `interact()`: A `Help` option added for each analysis, which, when clicked, displays a web page of explanation of the analysis and listing and definition of each presented parameter.

* `interact("BarChart")`: Numerical `y` variable and associated `stat` parameter added for analysis of means and related statistics across the levels of the categorical variable `x`.

* `interact("BarChart")`: The summary table of each category level paired with a number, to translate into bar height, can now be read as the input data table.

* `interact("Plot"): ID lableing of outliers added.

* `pivot()`: For a single `variable` to process, the variable name no longer repeated for each column of the output, one column per statistic computed.


## Bug Fixes

* `BarChart()`: When plotting a statistics for a numerical variable, `y`, the plotted values are now displayed at the console with sufficient width.

* `interact("ScatterPlot")`: Parameter `enhance` now works.

* `interact("ScatterPlot")`: Choose parameter `enhance` then parameter `by` now works.

* `interact("ScatterPlot")`: Parameters `by` and `size` now work together and properly written to the R code file.

* `interact("Trellis")`: Single VBS now plotted without a `by1` variable for Trellis plots per se.

* `Regression()`: For parameter `Rmd`, collinearity issue fixed.


# lessR version 4.2.4, Dec 07, 2022

## Updates

* `ref_group` for `Logit()`, new, more explanatory name for `ref`, the level of the binary target variable explicitly defined as the reference group instead of relying on the default.

* `train_test()` has new parameter `matrix_out` which outputs the data structures as matrices instead of as data frames.

* `Regression()`: For automatically generating and processing R markdown files, users can now 100% customize the output directly by creating their own input files, just one or all eight of the files.

* `Regression()`: Added parameters `Rmd_custom` to specify one or more custom input files and `Rmd_dir` to specify a custom directory where the files are stored.

* `Regression()`: For output, `vars` component added that is a vector of the variable names in the model beginning with the response variable.

* `Regression()`: Parameters `res_rows` and `pred_rows` changed to the more descriptive `n_res_rows` and `n_pred_rows`.


## Bug Fixes

* `interact("Histogram")`: The `bandwidth` slider for the `density` option now re-adjusts if a new variable is selected from the same data set.

* `interact("Plot")`: Points now plotted properly.

* `interact("Plot")`: Fill color properly set if a `by` variable is selected.

* `Plot()`: Transparency (trans parameter) now works when size as a variable and by are activated.

* `Plot()`: for a `fit` function, mse now properly computed.

* `recode()`: Entire data frame now not written to the console.

* `Regression()`: Text enlarged for scatterplot matrix.

* `Regression()`: Number of allowable terms in the model definition now greatly expanded.

* `Regression()`: When generating a markdown file with parameter `Rmd`, if reading a label file included with `lessR`, the correct data file is now properly listed instead of the label file.


# lessR version 4.2.3, Sept 11, 2022

## Primary Update

* `interact()`: lessR data analysis is now interactive, with each interactive analysis now displayed for analyzing the user's own data, which also includes summary statistics as output with the option to save the plot to a pdf file plus the corresponding R code.


## Updates

* `BarChart()`: Parameter `do_plot` added for the option of computing summary statistics but not plotting.

* `Histogram()`: Underlying algorithm more efficient.

* `Histogram(..., density=TRUE)`: `fill_gen` and `color_gen` revised to `fill_general` and` color_general`, and `fill_nrm` and `color_nrm` to `fill_normal` and `color_normal` though the old names still accepted, as with `bandwidth` in place of `bw` and `include_histogram` in place of `dn.hist`.

* `Histogram()`: for density curve, provided values for `fill_general` and `fill_normal` that are color names now are converted to the same transparency level as their default colors.

* `PieChart()`: value labels now separated from the category label so that size can be set independently.

* `pivot()`: Long labels now abbreviated to stay within column widths.

* `Plot()`: For numbers < 10000, more decimal digits for stat outcomes of `fit` parameter, such as MSE.

* `Plot()`: With a `by` variable a named, sequential color range such as "reds" can now be specified in addition to the qualitative range of "hues".

* `tt.brief()` removed, long since replaced by `tt_brief()`.


## Bug Fixes

* `loading lessR`: Now lessR loads properly if another previously loaded package had loaded shiny.

* `Histogram()`: Returns in list structure, such as `h`, saved output from `h <- Histogram(...)`.

* `Histogram()`: When `bin_start` was < 0 the number of displayed digits for the mid point of each bin could be excessive, now fixed.

* `Histogram()`: spelling error of out_suggewt to `out_suggest` fixed for output name.s

* `pivot()`: When constructing a table (instead of a dataframe), `NA`'s now properly displayed.

* `Plot()`: Restored title that indicates scaling of bubble plot.

* `Plot()`: Transparency on bubble plots now works.

* `Read2()`: Now works properly.



# lessR version 4.2.2, July 13, 2022

## Updates

* `BoxPlot()`, `Histogram()`: Recent message from outlier check from package `robustbase` removed.

* `Logit()`: Confusion matrix now displayed even if all predictions are for a single outcome category.

* `pivot()`: If not specified, output defaults to 3 decimal digits, otherwise displays the needed number of decimal digits to avoid rounding to 0.000.

* `pivot()`: For consistency, parameter `n_show_group` changed to `n_group_show`.

* `Plot()`: New parameter `n_bins` > 1 indicates to bin the numeric x-variable and plot the mean or median of the numeric y-variable for each bin, with each point size dependent on the corresponding bin sample size.

* `Plot()`: More stats displayed regarding each panel when doing a fit line.

* `Read()`: Browsing for data file in RStudio, message about hidden window removed.



## Bug Fixes

* `pivot()`: If `na_remove` is `FALSE`, the missing data value for the aggregated statistic was reported as 0 instead of `NA`.

* `Plot()`: y-axis label now evaluated on all axis values instead of only the maximum value, which, if 1.0, rounds to 1, only a single digit.

* `Plot()`: `segments=TRUE` now applies to all scatter plots, not just with `by=`.



# lessR version 4.2.0, June 3, 2022

## Updates

* `interact()`: Each interactive display now shows the underlying function call.

* `Plot()`: If `x` is equally spaced, a line chart not default if a `fit` line.

* `Plot()`: Parameter `sqrt`  deprecated for  `quat`.

* `Plot()`: Parameter `root`  deprecated for  `power`.

* `Plot()`: `fit_color` parameter added to set directly, not just with `style()` function.

* `Plot()`: When curve fitting with `fit` parameter, `b0` and `b1` given for the linearized line from nonlinear functions.

* `Prop_test()`: If the hypothesis test of a proportion is one-sided, the `alternative` hypothesis is now provided.


## Bug Fixes

*  `Histogram()`: `density=TRUE` properly generates console output.

*  `Plot()`: For `fit` parameter, `"reciprocal"` option removed as better covered with `"exp"` which also does exponential decay in place of `"reciprocal"` if no `by` variable.

*  `Plot()`: `fit_color` now works for a `fit` line.

*  `Prop_test()`: parameters such as `alternative` properly passed to R functions `binom.test()`, `prop.test()`, and `chisq.test()`.

*  `ttest()`: One-tailed alternatives `less` and `greater` options work.



# lessR version 4.1.9, May 4, 2022

## Updates

* `ANOVA()`: One-way, scatterplot labels separated more from plot

* `Histogram()`: Summary stats headings adjusted to better align with numerical values

* `Prop_test()`: Parameter `p0` changed to `pi` for consistency with `ttest()`, `p0` still works

* `reshape_long()`: Default name of `Response` changed from `"Value"` to `"Response"`

* `style()`: Slightly lighten grayscale bars and points from `"gray35"` to `"gray42"` and point `fill` and `color` from `"gray30"` to `"gray42"`

* `train_test()`: New function to either create training and testing data from a data frame with `x` and `y` combined or separated


## Bug Fixes

  * `Plot()`: a `--run-donttest` test example was improperly configured, now works
  * `Plot()`: Plotting a vector for `x` or `y` with `fit` now works


# lessR version 4.1.8, April 27, 2022

## Updates

* `ANOVA()`: Interaction plot for 2-way factorial reflects color `theme`

* `BarChart()`: Appropriate error message if `by` and `by1` parameters both specified as only one for one function call is allowed

* `BarChart()`: Bar chart from a pivot table for two vars now possible with `NA` column

* `data set`: `dataAnova_rbf` data set for randomized block factorial ANOVA added

* `data set`:  `dataAnova_sp` data set for split-plot design ANOVA added

* `interact()`: More colors added

* `interact()`: Trellis plot has added `violin_fill` and `box_fill` parameters

* `pivot()`: `by` variables except for `Date` variables by default now converted to factors, though controlled with parameter: `factors`

* `reshape_long()`: If needed, an ID variable is now provided by default

* `reshape_long()`: Generated `ID` variable now has a prefix in front of the integer ID by default, can be changed with the parameter: `prefix`

* `reshape_long()`: `sep` parameter specifies a separator between the prefix and the ID integer output data frame has ID variable listed first

* `Transform()`: Previously deprecated, its abbreviation trans() now removed


## Bug Fixes

* `details()`: Now properly reports details of a `tibble` version of a data frame

* `interact()`: `Histogram()` `fill` now set properly

* `Plot()`: Panels in Trellis plots with no data now properly display as blank with grid lines instead of showing an error message

* `Plot()`: Interaction plot with `segments=TRUE` of a pivot table now has all segments

* `Plot()`: Can now plot one continuous variable with violin/box/scatter plots with `by`, `by1`, and `by2` parameters

* `Plot()`: Bubble plot transparency option now works with parameter `trans`

* `Plot()`: Bubble plot `fill` and `color` now properly specified


# lessR version 4.1.7, March 30, 2022

## Updates

* `ANOVA()`: ANOVA 2-way factorial analysis provides Type II sum of squares for unbalanced designs

* `ANOVA()`: R-squared and related indices now reported to three decimal digits

* `ANOVA()`: Plotted point in interaction plot a little smaller

* `ANOVA()`: Scatterplot title removed for more room for the plot, labels adjusted

* `ANOVA()`: Scatterplot moved to the first plot displayed

* `BarChart()`: Right-margin legend for two variable chart no longer defaults to abbreviations for title and values, use `legend_abbrev` to specify

* `Histogram()`: Bars slightly more gray and slightly less blue

* `Plot()`: For `by` and `fit` parameters together, equation, MSE, and R2 given for each fit line

* `Regression()`: Analysis of covariance with one categorical variable and one continuous variable displays the ...\cr
    1. regression line and equation for each level of the categorical variable superimposed over the scatterplot\cr
    2. Type II SS for the ANOVA table\cr
    3. test of the interaction of the covariate with the grouping variable

* `Regression()`: `n_cat` parameter added to allow integer variables to be treated as categorical without declaring as a formal R `factor`

* `Regression()`: `kfold` parameter now applies to models with categorical variables with dummy variables created automatically

* `Regression()`: Extra line of spacing between major sections of output

* `Regression()`: Grid lines added to scatterplot

* `Regression()`: title removed from scatterplot, remains in text console output

* `Regression()`: Parameter `best_sub` provides the value `"Cp"` for Mallow's `"Cp"` statistic in addition to the default value `"adjr2"` for adjusted R-squared

* `rename()`: New utility function for renaming a variable in the specified data frame


## Bug Fixes

* `ANOVA()`: Interaction plot for 2-way factorial generalizes better beyond two levels brief output works more reliably for 2-way factorial

* `Regression()`: `scale_response` parameter now works, applicable when `new_scale` is implemented, `FALSE` by default but if `TRUE` then the response variable `y` is also rescaled


# lessR version 4.1.6, February 18, 2022

## Updates

* `ANOVA()`: Better calculation of size of left-margin for pairwise mean differences plot

* `Logit()`: For a single predictor, for a given probability classification
threshold, the `x`-cutoff value now provided

* `Logit()`: For a single predictor, annotations added to the sigmoid curve

* `Logit()`: `ref` parameter for designating the value of the response variable that is the reference group instead of relying upon defaults

* `Logit()`: Rows in the classification table reversed to correspond to sigmoid curve plot

* `pivot()`: For consistency with other `na` parameters, `show_group_na` parameter changed to `na_show_group`

* `Plot()`: Boxplot median line width increased to 2 for better visibility in the presence of an embedded scatterplot


## Bug Fixes

* `Logit()`: Bug fixed that occurred for 50\% of the analyses when the response variable has integer input values of 0,1 instead of a `factor` such as Man/Woman

* `Logit()`: Fitted values now properly displayed when `X1_new`, etc. specified

* `Logit()`: Edge condition that crashed with very little variance among fitted probabilities now fixed

* `Plot()`: `by1` parameter now works when `x` is categorical

* `Regression()`: Table of estimates now properly displayed for indicator variables with large number of characters for the variable names


# lessR version 4.1.5, January 29, 2022

## Updates

* `BarChart()`: `digits_d` parameter added for text output to control number of decimal digits for two categorical variable output

* `BarChart()`: Default gray fill color for the bars lightened slightly

* `data()`:\cr
  `dataStockPrice` updated to Jan 1, 2022\cr
  `dataEmployee_lbl` updated\cr
  `dataWeightLoss` data file added\cr
  `dataAnova_1way` data file added\cr
  `dataAnova_rb` data file added\cr
  `dataAnova_2way` data file added\cr

* `factors()`: Now processes tidyverse `tibble` version of a data frame

* `Help()`: Deprecated, now removed, replaced by vignettes

* `interact()`: When prompting for valid names by passing no arguments, no longer displays an error message

* `interact()`: More colors added to choice of fill colors for interactive displays

* `Logit()`: For a single predictor variable, if the response `y` is non-numeric, then the value set at 1 has the highest mean, for a positive difference

* `Logit()`: For a single predictor variable, logistic curve better labeled

* `Nest()`: If response variable is a character variable, automatically converted to a `factor` to allow to run without an error

* `Plot()`: For Trellis plots, default changed to a single column (`n_col=1`)

* `Read()`: If specified a `lessR` data file improperly, the list of valid data files is displayed

* `Read()`: Read data files in the Open Document Spreadsheet format, `.ods`

* `Read()`: New parameter row_names for consistent interface across the various file formats, for `cs` files R `row.names` still works

* `Read()`: Report of variables with all unique values moved to brief report

* `Regression()`: If `x` is a factor with two levels, the regression line is plotted in the scatterplot

* `Regression()`: Scatterplot can now have customized axis labels size, set by `style()`

* `reshape_long()`: New function that is a simple wrapper for Base R `reshape()` with sensible parameter names and sensible defaults, and allow for variable ranges of columns to transfer from wide to long

* `reshape_wide()`: New function that is a simple wrapper for Base R `reshape()` with sensible parameter names to convert a long-form data frame to a wide-form

* `Write()`: Parameters -- `data` and `to` -- switched to a more natural order with `data` now the first parameter: `Write(data=, to=, ...)`

* `Write()`: Write data frames in the Open Document Spreadsheet format, `.ods`, with `format="ODS"`

* `Write()`: Write data frames in the SPSS format, `.sav`, with `format="SPSS"`


## Bug Fixes

* `ANOVA()`: Family-wise confidence level now reported in output

* `BarChart()`: Formatting so that columns do not run together for some output with integers represented as integers instead of double

* `BarChart()`: Specifying `one_plot=TRUE` and multiple variables now works

* `BarChart()`: Custom `ylab` now works when the stat parameter is activated

* `Histogram()`: For `density=TRUE`, `quiet=TRUE` now works

* `Logit()`: If many variables, such as from created dummy variables, columns of estimated coefficients now align correctly

* `PieChart()`: Text now responds to corresponding style parameters: `lab_cex`, `main_cex=1.5`, and `values_size`

* `Plot()`: If a `by` or `by1` variable, misleading warning message sort order deleted



# lessR version 4.1.4, December 14, 2021

## Updates

* `ANOVA()`, `BarChart()`, `Histogram()`, `pivot()`, `Plot()`, `Regression()`, `ttest()`: Informative error message added if a subset with the rows parameter returns no rows to subset

* `getColors()`: Little more differentiation between default sequential colors by lightening a bit more the lightest color

* `Histogram()`: Output objects `n.bins` and `n.miss` updated to n_bins and n_miss

* `Histogram()`: `density=TRUE` output provides more summary statistics and suggestions

* `Plot()`: When specifying a fit line with a by categorical variable the sum of squared errors for each category are better labeled

* `Plot()`: For a `by` categorical variable, no longer is the correlational analysis done for all the data, but the SSE is reported for each group

* `Plot()`: Pairwise correlation output takes up fewer lines

* `Plot()`: Variable labels for `y`-axis made a little longer and still fit without breaking into an additional line

* `Plot()`: Some suggestions now change depending on random "coin flip"

* `Plot()`: Trellis plot default changed from `n_col=1` to `n_row=1`

* `Regression()`: Standard deviation of response variable added to fit information, other stats removed

* `Regression()`: Parameter `fit_line` width set at 1.5 if plotting w/o outlier line also and no standard error region for original line

* `to()`: Parameter `same.size` updated to `same_size`, old value still works



## Bug Fixes


* `BarChart()`: For theme other than `"hues"`, `fill` colors the same by default unless an ordered `factor`, then a sequential palette

* `Correlation()`: Pairwise correlation analysis properly returns lower and upper bounds of confidence interval about the sample correlation coefficient

* `Correlation()`: Pairwise correlation when called from `Correlation()` function works

* `PieChart()`: Default colors with default color theme, `"colors"`, now has qualitative color palette `"hues"`, the same as bar chart, for a non-ordinal categorical variable

* `PieChart()`: Inner circle that creates the hole now with higher resolution so as to make a smoother circle

* `PieChart()`: Better placement of the plot title if there is one



# lessR version 4.0.8, November 18, 2021

## Updates

* `ANOVA()`: Randomized blocks fitted means visualizations enhanced

* `ANOVA()`: `rb_points` parameter removed

* `Histogram()`: For grayscale with a black background, histogram bars have no transparency and are lighter

* `interact()`: `"PieChart"` option added for interactive, Shiny display

* `Logit()`: Grid lines added to logit plot for a single predictor transparency of 0.7 added to the points in the logit plot

* `pivot()`: If `n=0` for an output row or column, then converting to proportions returns 0's instead of `NaN`'s

* `pivot()`: New parameter `show_group_na` with default of `TRUE` that will list `NA` for missing data of a grouping variable as a level on the output

* `PieChart()`: Labels proper size outside of RStudio

* `Plot()`: `plot_errors` now plots the connecting segments from each point to the fitted line with gray if `style("gray")`

* `Plot()`: Parameter `size` for size of points now applies to a scatterplot matrix

* `Plot()`: `fill` color for points and bubbles lightened slightly for gray scale

* `Plot()`: Trellis line plots increase slightly the width of the lines

* `recode()`: Transformed variables converted to be consistent with their type ex: convert a `character` variable to `integer`, but before was still `character`

* `Regression()`: For parameter `new_scale`, new option is `"centered"`

* `Regression()`: For all rescaling, now default is only predictor numeric variables and only for numerical variables with more than two values

* `Regression()`: If rescaling, set new parameter `rescale_response` to `TRUE` to also rescale the response variable

* `Regression()`: For model fit, standard deviation and min and max of the target variable displayed along with the 95% range of variation of the residuals, with values displayed with commas for large numbers

* `Regression()`: Fitted vs residuals plot more efficiently sized and largest Cooks Distance value displayed as a sub-title

* `Regression()`: Summary stats of response variable added to Basic Analysis

* `Sort()`: Feedback includes names of sorted variables in place of their index

* `ttest()`: For one group t-test, density curve now has dark gray border and value of smd added to the top text display over the visualization


## Bug Fixes

* `ANOVA()`: Randomized blocks ANOVA displays correct visualizations

* `BarChart()`: Ordinal factors properly display as color gradients, e.g., "blues"

* `PieChart()`: `theme` other than default now implemented

* `Plot()`: For plotting a Trellis plot with a `by` variable, all levels correctly plotted and legend correct

* `Plot()`: If `x` or `y` is categorical and the other continuous, if a `by` variable then `fill` and `color` colors properly displayed at end of display

* `Sort()`: Internal coding simplified for improved functionality and generality

* `ttest()`: `pdf_file` now works for one group t-test of the mean


# lessR version 4.0.6, October 24, 2021

## Updates

* `interact()`: New function for running one of the following shiny apps for interactive visualizations: "BarChart1", "BarChart2", "Histogram", "ScatterPlot", "Trellis", e.g., interact("BarChart1")

* `pivot()`: Read a tidyverse `tibble` in addition to standard R data frames

* `pivot()`: When naming variables, for variable `y`, now `y_mean` instead of `y_mn`

* `Plot()`: For `x=categorical` and `y=continuous`, or vice versa, no jitter added if there are no duplications of `y` at each level of `x`, plus more jitter added for larger sample size if jitter is needed


## Bug Fixes

* `BarChart()`: Sort now works properly with a horizontal plot

* `pivot()`: Now can have one variable to aggregate and one aggregation variable named `x`

* `Regression()`: Debugging code removed from the k-fold cross-validation analysis


# lessR version 4.0.5, October 4, 2021

## Updates

* `ANOVA()`: Scatterplot for 1-way ANOVA now has grid lines and jitter

* `ANOVA()`: Scatterplot for 1-way ANOVA now has `jitter_x` parameter added to customize the jitter level

* `ANOVA()`: Scatterplot for 1-way ANOVA now has means plotted in a dark red instead of a dark gray

* `BarChart()`: Tilde removed from each label if for a `by` variable in the legend where it is nonfunctional

* `pivot()`: User defined functions accounted for and named in the output

* `pivot()`: When analysis of all data values, dropped the `Grand_Stat` label

* `Plot()`: Point color and fit line now a little darker and complements of each other, `plot_errors` segments a little darker as well

* `Plot()`: For `fit="reciprocal"`, fit line present for all values of `x`, even if plot window does not accommodate the full range, can adjust range with parameter `pad_y`

* `Plot()`: Parameter `root` added for general root transformation beyond the value of 0.5 for the square root

* `Plot()`: Parameter `fit_power` added to raise `y` to the designated power for the `exp`, `root`, and `reciprocal` transformations

* `Plot()`: Correlational analysis no longer displayed for a non-linear fit line

* `Plot()`: SSE displayed for corresponding `fit` line (curve)


## Bug Fixes

* `BarChart()`: Two variable chart with parameters `x` and `by` specified now correctly displays a color range when the style is not the default theme

* `BarChart()`: Base R `text()` function misleadingly displays text at size 1 if a value of 0 is entered, lessR functions that rely on the R text function now fixed by changing an input value of 0 to 0.01

* `pivot()`: Output variables now properly named

* `Plot()`: Trellis plots with `by1` and `by2` parameters work in Shiny environment


# lessR version 4.0.3, September 9, 2021

## Updates

* `BarChart()`: If parameter `sta` not specified, there is now no default if the parameter `y` variable is specified without an indication of what statistic to compute

* `BarChart()`: Gentle termination with a message if `stats` specifies a transform that results in missing data in the computed summary table

* `BarChart()`: For analysis of computing a summary table with the parameter `stat` parameter, no longer display the summary stats for the parameter `x` variable when a by variable is present

* `getColors()`: Default qualitative color palette softened a bit by increasing luminance from 55 to 60

* `getColors()`: By default, now does not generate output when called from visualization parameters parameter `fill` and parameter `color` for parameter `BarChart()`, etc.

* `getColors()`: Output parameter values changed to parameter `logical`, parameter `TRUE` and parameter `FALSE`

* `pivot()`: New parameter parameter `table_long` allows the table computation for a cross-tabs table be output in long form

* `pivot()`: Tabulate computation continues to work, though no longer documented as it is supersede


## Bug Fixes

* `BarChart()`: Further adjustment to accommodate very large legend labels for two variable plots

* `BarChart()`: If the y values are input, the display of the values will be properly turned off if the parameter `style` option for values is set to parameter `"off"`

* `Plot()`: Default jitter for 1-D scatterplot works again in VBS plots

* `Plot()`: Parameter `by` works again for VBS plots, multiple plots on same panel

* `Plot()`: Parameter `color` now works in conjunction with the `by` parameter

* `Plot()`: Applied to a scatterplot of two continuous variables:\cr
  if `color` is set to `"off"` (or `"transparent"`), a requested `fit line` still displays\cr
  means are now properly plotted for a scatterplot of a continuous and
     categorical variable when jitter is applied to the plotted points\cr
  default outlier shape in gray scale changes to diamond as documented


# lessR version 4.0.2, August 5, 2021

## Updates

* `BarChart()`: For a two categorical variable bar chart, the `legend` labels are by default no longer abbreviated, instead sufficient room is generated by the plot

* `BarChart()`: New parameter `legend_abbrev` allows for the specification of the maximum number of characters to display for the `legend` labels

* `BarChart()`: For a two categorical variable bar chart, better default placement of the `legend` new parameter `legend_adj` allows for horizontal adjustment of the `legend`


## Bug Fixes

* `BarChart()`: First variable `x` is a vector works again

* `Histogram()`: Parameter `pdf_file` works

* `Plot()`: Parameter `enhance=TRUE` correctly prints least-squares line when fill changed



# lessR version 4.0.1, June 6, 2021

## Updates

* `BarChart()`: When fill or color set with `getColors()`, the value of n, the number of colors, is provided according to the number of bars

* `BarChart()`: When horiz is `TRUE`, order of sort changed so that `"-"` starts at top

* `BarChart()`: Space to separate the `x`-axis label when several lines revised parameter `pdf` to `pdf_file`

* `corProp()`: Alias changed from `prop` to `cp`, so `prop` for new function `Proportion()`

* `Density()`: Parameter `pdf` to `pdf_file`

* `Histogram()`: Parameter `pdf` to `pdf_file`

* `kurtosis()`: New function for computing kurtosis, available for the `pivot()` function

* `pivot()`: Choose any two of the following three parameters: multiple compute functions, multiple values over which to compute, and multiple grouping (`by`) variables

* `pivot()`:  No `by` variables imply to do grand total(s) without an aggregation

* `pivot()`: Choose any two of the following three parameters: multiple compute functions, multiple variables, and multiple `by`-variables.

* `pivot()`: Sort parameter applies for a single aggregated numerical variable and specifies the variable or column number to sort

* `pivot()`: For each non-decimal digit variable with unique data values, display

* `pivot()`: The variable name and the unique values to better label the output when drilling down into levels of one or more categorical variables

* `pivot()`: Compute `quantiles()` function provides a standard data frame

* `pivot()`: Compute `table()` function provides a cross-classification table for a discrete aggregated variable

* `pivot()`: Table frequencies can be converted to proportions, and row and column proportions

* `pivot()`: Parameter `out_names` parameter to custom-name aggregated variables

* `pivot()`: Parameter `na_by` renamed to `na_by_show` to better communicate its meaning skew and kurtosis added to the list of available descriptive statistics

* `pivot()`: Parameter `q_num` specifies number of intervals for quantiles

* `pivot()`: Parameter `rows` subsets rows of the data frame for analysis

* `pivot()`: Parameter `valu`e changed to parameter variable

* `pivot()`: Parameters `rows_by` and `cols_by` changed to `by` and `by_cols`

* `Plot()`: Scatterplot matrix does a loess fit if `fit=TRUE`

* `Plot()`: If multiple `x` or `y` variables, text correlation analysis displayed for each combination

* `Plot()`: If a `by` variable, then text correlation for each level not yet available, so not displayed

* `Plot()`: Default for plotting a fit line with by groups is to not plot the standard errors because the plot becomes overcrowded

* `Plot()`: Warning displayed if the date field or a by/by1 field is not ordered

* `Plot()`: Stacked time series chart of different shades of same hue, such as `"blues"` now have each sub-plot with a black border

* `Plot()`: Trellis plot distinguishes `area_fill` under a line from `fill` for a point

* `Plot()`: `radius` value for bubble plot frequency matrix dependent on size of

* `Plot()`: Largest frequency `radius` value displayed for bubble plot frequency matrix

* `prob_norm()`: Probability is returned as the value of the function, not just printed

* `prob_tcut()`: Cutoff is returned as the value of the function, not just printed

* `Prop_test()`: New function for the analysis of proportions: test of homogeneity for one or more samples based on the proportion of successes for a specific value of a variable, and for a single sample, goodness-of-fit for a single categorical variable and test of independence for two categorical variables

* `Prop_test()`: `prop` is alias

* `recode()`: Changed to lower case function name

* `rescale()`: Changed to lower case function name

* `Regression()`: Bubble plot form of a scatterplot for `integer` variables with less than 10 unique values and a single predictor variable

* `skew()`: New function for computing skew, available for the `pivot()` function

* `style()`: `slatered` theme added

* `style()`: `ellipse_fill` for default `"colors"` theme now a pale brown instead of blue


## Bug Fixes

* `BarChart()`: With more than 30 categories, a message to indicate how to retrieve now properly displays instead of crashing

* `BarChart()`: `fill=(count)` would fail for a large number of levels

* `BarChart()`: Stacked bars from multiple items now works with variable labels

* `BarChart()`: Stacked bars from multiple items now works for binary responses

* `Extract()`: Now works if name of data frame is a function in another context

* `Extract()`: Now works even if one variable name is embedded in another name

* `Plot()`: Forcing an evaluation of a scalar logical on a vector fixed

* `Plot()`: `theme` parameter works for most common parameters

* `Plot()`: Bubble plot frequency matrix text output works with labels

* `Plot()`: Bubble plot frequency matrix plot `x`-axis works with binary response

* `Plot()`: `area_fill` works correctly

* `ttest()`: For paired analysis, `x`-axis properly labeled Difference

`
