Longitudinal analysis pipeline with longdat_cont()

Time (the proxy for treatment) as a continuous variable

Introduction

This is an example of running longdat_cont(). Note that the time variable (proxy of treatment) here should be continuous. If the time variable is discrete, please apply longdat_disc() instead.

# Load the packages
library(LongDat)
library(kableExtra)

Explaining the input data frame format

The input data frame (called master table) should have the same format as the example data “LongDat_cont_master_table”. If you have metadata and feature (eg. microbiome, immunome) data stored in separate tables, you can go to the section Preparing the input data frame with make_master_table() below. The function make_master_table() helps you to create master table from metadata and feature tables.

Now let’s have a look at the required format for the input master table. The example below is a dummy longitudinal data set with 2 time points (day 0 and 7). Here we want to see if the treatment has a significant effect on gut microbial abundance or not.

# Read in the data frame. LongDat_cont_master_table is already lazily loaded.
master <- LongDat_cont_master_table
master %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12) %>%
    kableExtra::scroll_box(width = "700px", height = "200px")
Individual Day sex age DrugA DrugB BacteriumA BacteriumB BacteriumC
1 0 0 61 0.0 10 11 4 26
1 7 0 61 0.0 10 13 2 22
2 0 0 66 0.0 640 344 0 6
2 7 0 66 0.0 320 3 0 670
3 0 0 63 7.5 100 55 0 10
3 7 0 63 7.5 0 5 0 111
4 0 0 47 0.0 300 60 0 7
4 7 0 47 0.0 200 4 0 100
5 0 1 51 0.0 160 100 20 5
5 7 1 51 0.0 130 3 64 200
6 0 1 53 10.0 0 32 138 4
6 7 1 53 10.0 0 2 0 54
7 0 0 50 0.0 40 22 105 180
7 7 0 50 0.0 20 27 158 49
8 0 1 54 0.0 100 24 0 0
8 7 1 54 0.0 80 0 0 48
9 0 0 44 0.0 160 65 0 20
9 7 0 44 0.0 80 1 0 130
10 0 0 60 0.0 100 19 163 0
10 7 0 60 0.0 25 0 41 38

As you can see, the “Individual” is at the first column, and the features (dependent variables), which are gut microbial abundances in this case, are at the end of the table. Any column apart from individual, test_var (e.g. Day) and dependent variables will be taken as potential covariates (could be confounder or mediator). For example, here the potential covariates are sex, age, drug A and drug B. Please avoid using characters that don’t belong to ASCII printable characters for the column names in the input data frame.

Preparing the input data frame with make_master_table()

If you have your input master table prepared already, you can skip this section and go to Run longdat_cont() directly. If your metadata and feature (eg. microbiome, immunome) data are stored in two tables, you can create a master table out of them easily with the function make_master_table().

First, let’s take a look at an example of the metadata table. Metadata table should be a data frame whose columns consist of sample identifiers (sample_ID, unique for each sample), individual, time point and other meta data. Each row corresponds to one sample_ID.

# Read in the data frame. LongDat_cont_metadata_table is already lazily loaded.
metadata <- LongDat_cont_metadata_table
metadata %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12) %>%
    kableExtra::scroll_box(width = "700px", height = "200px")
Sample_ID Individual Day sex age DrugA DrugB
1_0 1 0 0 61 0.0 10
1_7 1 7 0 61 0.0 10
2_0 2 0 0 66 0.0 640
2_7 2 7 0 66 0.0 320
3_0 3 0 0 63 7.5 100
3_7 3 7 0 63 7.5 0
4_0 4 0 0 47 0.0 300
4_7 4 7 0 47 0.0 200
5_0 5 0 1 51 0.0 160
5_7 5 7 1 51 0.0 130
6_0 6 0 1 53 10.0 0
6_7 6 7 1 53 10.0 0
7_0 7 0 0 50 0.0 40
7_7 7 7 0 50 0.0 20
8_0 8 0 1 54 0.0 100
8_7 8 7 1 54 0.0 80
9_0 9 0 0 44 0.0 160
9_7 9 7 0 44 0.0 80
10_0 10 0 0 60 0.0 100
10_7 10 7 0 60 0.0 25

This example is a dummy longitudinal meatadata with 2 time points for each individual. Besides sample_ID, individual, day columns, there are also information of sex, age and drugs that individuals take. Here we want to see if the treatment has a significant effect on gut microbial abundance or not.

Then, let’s see how a feature table looks like. Feature table should be a data frame whose columns only consist of sample identifiers (sample_ID) and features (dependent variables, e.g. microbiome). Each row corresponds to one sample_ID. Please do not include any columns other than sample_ID and features in the feature table.

# Read in the data frame. LongDat_cont_feature_table is already lazily loaded.
feature <- LongDat_cont_feature_table
feature %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12) %>%
    kableExtra::scroll_box(width = "700px", height = "200px")
Sample_ID BacteriumA BacteriumB BacteriumC
1_0 11 4 26
1_7 13 2 22
2_0 344 0 6
2_7 3 0 670
3_0 55 0 10
3_7 5 0 111
4_0 60 0 7
4_7 4 0 100
5_0 100 20 5
5_7 3 64 200
6_0 32 138 4
6_7 2 0 54
7_0 22 105 180
7_7 27 158 49
8_0 24 0 0
8_7 0 0 48
9_0 65 0 20
9_7 1 0 130
10_0 19 163 0
10_7 0 41 38

This example is a dummy longitudinal feature data. It stores the gut microbial abundance of each sample.

To enable the joining process of metadata and feature tables, please pay attention to the following rules.

  1. The row numbers of metadata and feature tables should be the same.
  2. Sample_IDs are unique for each sample (i.e. no repeated sample_ID)
  3. Metadata and feature tables have the same sample_IDs. If sample_IDs don’t match between the two tables, the joining process will fail.
  4. As mentioned above, feature table should include only the columns of sample_ID and features.
  5. Avoid using characters that don’t belong to ASCII printable characters for the column names.

Now let’s create a master table and take a look at the result!

master_created <- make_master_table(metadata_table = LongDat_cont_metadata_table,
    feature_table = LongDat_cont_feature_table, sample_ID = "Sample_ID", individual = "Individual")
#> [1] "Finished creating master table successfully!"

master_created %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12) %>%
    kableExtra::scroll_box(width = "700px", height = "200px")
Individual Day sex age DrugA DrugB BacteriumA BacteriumB BacteriumC
1 0 0 61 0.0 10 11 4 26
1 7 0 61 0.0 10 13 2 22
2 0 0 66 0.0 640 344 0 6
2 7 0 66 0.0 320 3 0 670
3 0 0 63 7.5 100 55 0 10
3 7 0 63 7.5 0 5 0 111
4 0 0 47 0.0 300 60 0 7
4 7 0 47 0.0 200 4 0 100
5 0 1 51 0.0 160 100 20 5
5 7 1 51 0.0 130 3 64 200
6 0 1 53 10.0 0 32 138 4
6 7 1 53 10.0 0 2 0 54
7 0 0 50 0.0 40 22 105 180
7 7 0 50 0.0 20 27 158 49
8 0 1 54 0.0 100 24 0 0
8 7 1 54 0.0 80 0 0 48
9 0 0 44 0.0 160 65 0 20
9 7 0 44 0.0 80 1 0 130
10 0 0 60 0.0 100 19 163 0
10 7 0 60 0.0 25 0 41 38

The table “master_created” is just the same as the table “master” or “LongDat_cont_master_table” in the previous section, with the “Individual” as the first column, and the features (dependent variables), which are gut microbial abundances in this case, are at the end of the table. Any column apart from individual, test_var (e.g. Day) and dependent variables will be taken as potential covariates (could be confounder or mediator). For the details of the arguments, please read the help page of this function by using ?make_master_table.

OK, now we’re ready to run longdat_cont()!

Run longdat_cont()

The input is the example data frame LongDat_cont_master_table (same as “master” or “master_created” in the previous sections), and the data_type is “count” since the dependent variables (features, in this case they’re gut microbial abundance) are count data. The “test_var” is the independent variable you’re testing, and here we’re testing “Day” (time as the proxy for treatment). The variable_col is 7 because the dependent variables start at column 7. And the fac_var mark the columns that aren’t numerical. For the details of the arguments, please read the help page of this function by using ?longdat_cont.

The run below takes less than a minute to complete. When data_type equals to “count”, please remember to set seed (as shown below) so that you’ll get reproducible randomized control test.

# Run longdat_cont() on LongDat_cont_master_table
set.seed(100)
test_cont <- longdat_cont(input = LongDat_cont_master_table, data_type = "count",
    test_var = "Day", variable_col = 7, fac_var = c(1, 3))
#> [1] "Start data preprocessing."
#> [1] "Finish data preprocessing."
#> [1] "Start selecting potential covariates."
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] "Finished selecting potential covariates."
#> [1] "Start null model test."
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] "Finish null model test."
#> [1] "Start covariate model test."
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] "Finish covariate model test."
#> [1] "Start unlisting tables from covariate model result."
#> [1] "Finish unlisting tables from covariate model result."
#> [1] "Finished post-hoc correlation test."
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] "Finished post-hoc correlation test."
#> [1] "Start randomized negative control model test."
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] 1
#> [1] 2
#> [1] 3
#> [1] "Finish randomized negative control model test."
#> [1] "Start removing the dependent variables to be exlcuded."
#> [1] "Finish removing the dependent variables to be exlcuded."
#> [1] "Start generating result tables."
#> [1] "Finished successfully!"

If you have completed running the function successfully, you’ll see the message “Finished successfully!” at the end. The results are stored in list format.

Results

The major output from longdat_cont() include a result table and a covariate table. If you have count data (data_type equals to “count”), then there are chances that you get a third table “randomized control table”. If you specify data_type as either “measurement” or “others”, then you’ll get a “Normalize_method” table. For more details about the “randomized control table” and “Normalize_method” table, please read the help page of this function by using ?longdat_cont.

Result table

Let’s have a look at the result table first.

# The first dataframe in the list is the result table
result_table <- test_cont[[1]]
result_table %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12, position = "center") %>%
    kableExtra::scroll_box(width = "700px")
Feature Prevalence_percentage Mean_abundance Signal Effect EffectSize Null_time_model_q Post-hoc_q
BacteriumA 90 39.50 OK_nc Decreased -0.7809864 0.0000011 0.0000482
BacteriumB 45 34.75 NS NS -0.1328821 0.4496104 0.5765105
BacteriumC 90 84.00 OK_nc Enriched 0.7112976 0.0012725 0.0004375

The second and third columns show the prevalence and mean abundance of each feature According to the “Signal” column, treatment is a significant predictor for BacteriumA and BacteriumC as they show “OK_nc” (which represents OK and no covariate), meaning that the abundance of BacteriumA and BacteriumC alter significantly through time (proxy of treatment), and that there is no potential covariate. If there is covariate effect in the result, please see the covariate table to find out what the covariates are. As for BacteriumB, time (proxy of treatment) has no effect on its abundance.

The following column “Effect” describes the trend of dependent variables change along time. Here we can tell that BacteriumA and BacteriumC have decreasing and increasing patterns, respectively. From the next column “EffectSize”, we know that the effect sizes are -0.78 and 0.71, respectively. The important and the most relevant information for users ends here, which are listed from the first column to “EffectSize”.

Then the following columns contain the details of model test p values (“Null_time_model_q”), the post-hoc test p values (Post.hoc_q). For more detailed information of the columns in the result table, please refer to the help page by using ?longdat_cont.

The explanation of each type of “Signal” is listed below.

Signal Meaning Explanation
NS Non-significant There’s no effect of time.
OK_nc OK and no covariate There’s an effect of time and there’s no potential covariate.
OK_d OK but doubtful There’s an effect of time and there’s no potential covariate, however the confidence interval of the test_var estimate in the model test includes zero, and thus it is doubtful. Please check the raw data (e.g., plot feature against time) to confirm if there is real effect of time.
OK_nrc OK and not reducible to covariate There are potential covariates, however there’s an effect of time and it is independent of those of covariates.
EC Entangled with covariate There are potential covariates, and it isn’t possible to conclude whether the effect is resulted from time or covariates.
RC Effect reducible to covariate There’s an effect of time, but it can be reduced to the covariate effects.

Covariate table

Next, let’s take a look at the covariate table.

# The second dataframe in the list is the covariate table
covariate_table <- test_cont[[2]]
covariate_table %>%
    kableExtra::kbl() %>%
    kableExtra::kable_paper(bootstrap_options = "responsive", font_size = 12, position = "center") %>%
    kableExtra::scroll_box(width = "700px")
Feature Covariate1 Covariate_type1 Effect_size1

The columns of this covariate table are grouped every three columns. “Covariate1” is the name of the covariate, while “Covariate_type1” is the covariate type of covariate1, that is, if the effect of time is reducible to covariate1. “Effect_size1” is the effect size of the dependent variable values between different levels of covariate1. If there are more than one covariates, they will be listed along the rows of each dependent variable. Since there is no covariate effect found in this example (according to the result table), the covariate table is blank. If you’d like to see a result with covariates, please read the vignette of longdat_disc().

Result interpretation

From the result above, we see that the treatment induces significant changes on the abundance of BacteriumA and BacteriumC, while causing no alteration in that of BacteriumB.

Plotting the result

Finally, we can plot the result with the function cuneiform_plot(). The required input is a result table from longdat_cont() (or any table with the same format as a result table does).

test_plot <- cuneiform_plot(result_table = test_cont[[1]], title_size = 15)
#> [1] "Finished plotting successfully!"
test_plot

Here we can see the result clearly from the cuneiform plot. It shows the features whose signals are not “NS”. The left panel displays the effects in each time interval. Red represents positive effect size while blue describes negative one (colors can be customized by users). Signficant signals are indicated by solid shapes, whereas insignificant signals are denoted by transparent ones. The right panel displays the covariate status of each feature, and users can remove it by specifying covariate_panel = FALSE. For more details of the arguments, please read the help page of this function by using ?cuneiform_plot.

Wrap-up

This tutorial ends here! If you have any further questions and can’t find the answers in the vignettes or help pages, please contact the author ().