GPU-Accelerated Ordinary Differential Equations (ODE) in R with diffeqr

Note: diffeqr::diffeqgpu_setup can take awhile to run the first time as it installs the drivers!

Now we simply use EnsembleGPUKernel(degpu$CUDABackend()) with a GPU-specialized ODE solver GPUTsit5() to solve 10,000 ODEs on the GPU in parallel:

sol <- de$solve(ensembleprob,degpu$GPUTsit5(),degpu$EnsembleGPUKernel(degpu$CUDABackend()),trajectories=10000,saveat=0.01)

For the full list of choices for specialized GPU solvers, see the DiffEqGPU.jl documentation.

Note that EnsembleGPUArray can be used as well, like:

sol <- de$solve(ensembleprob,de$Tsit5(),degpu$EnsembleGPUArray(degpu$CUDABackend()),trajectories=10000,saveat=0.01)

though we highly recommend the EnsembleGPUKernel methods for more speed. Given the way the JIT compilation performed will also ensure that the faster kernel generation methods work, EnsembleGPUKernel is almost certainly the better choice in most applications.

Benchmark

To see how much of an effect the parallelism has, let’s test this against R’s deSolve package. This is exactly the same problem as the documentation example for deSolve, so let’s copy that verbatim and then add a function to do the ensemble generation:

library(deSolve)
Lorenz <- function(t, state, parameters) {
  with(as.list(c(state, parameters)), {
    dX <-  a * X + Y * Z
    dY <-  b * (Y - Z)
    dZ <- -X * Y + c * Y - Z
    list(c(dX, dY, dZ))
  })
}

parameters <- c(a = -8/3, b = -10, c = 28)
state      <- c(X = 1, Y = 1, Z = 1)
times      <- seq(0, 100, by = 0.01)
out <- ode(y = state, times = times, func = Lorenz, parms = parameters)

lorenz_solve <- function (i){
  state      <- c(X = runif(1), Y = runif(1), Z = runif(1))
  parameters <- c(a = -8/3 * runif(1), b = -10 * runif(1), c = 28 * runif(1))
  out <- ode(y = state, times = times, func = Lorenz, parms = parameters)
}

Using lapply to generate the ensemble we get:

> system.time({ lapply(1:1000,lorenz_solve) })
   user  system elapsed
 225.81    0.46  226.63

Now let’s see how the JIT-accelerated serial Julia version stacks up against that:

> system.time({ de$solve(ensembleprob,de$Tsit5(),de$EnsembleSerial(),trajectories=1000,saveat=0.01) })
   user  system elapsed
   2.75    0.30    3.08

Julia is already about 73x faster than the pure R solvers here! Now let’s add GPU-acceleration to the mix:

> system.time({ de$solve(ensembleprob,degpu$GPUTsit5(),degpu$EnsembleGPUKernel(degpu$CUDABackend()),trajectories=1000,saveat=0.01) })
   user  system elapsed 
   0.11    0.00    0.12

Already 26x times faster! But the GPU acceleration is made for massively parallel problems, so let’s up the trajectories a bit. We will not use more trajectories from R because that would take too much computing power, so let’s see what happens to the Julia serial and GPU at 10,000 trajectories:

> system.time({ de$solve(ensembleprob,de$Tsit5(),de$EnsembleSerial(),trajectories=10000,saveat=0.01) })
   user  system elapsed
  35.02    4.19   39.25

> system.time({ de$solve(ensembleprob,degpu$GPUTsit5(),degpu$EnsembleGPUKernel(degpu$CUDABackend()),trajectories=10000,saveat=0.01) })
   user  system elapsed 
   1.22    0.23    1.50 

To compare this to the pure Julia code:

using OrdinaryDiffEq, DiffEqGPU, CUDA, StaticArrays
function lorenz(u, p, t)
    σ = p[1]
    ρ = p[2]
    β = p[3]
    du1 = σ * (u[2] - u[1])
    du2 = u[1] * (ρ - u[3]) - u[2]
    du3 = u[1] * u[2] - β * u[3]
    return SVector{3}(du1, du2, du3)
end

u0 = SA[1.0f0; 0.0f0; 0.0f0]
tspan = (0.0f0, 10.0f0)
p = SA[10.0f0, 28.0f0, 8 / 3.0f0]
prob = ODEProblem{false}(lorenz, u0, tspan, p)
prob_func = (prob, i, repeat) -> remake(prob, p = (@SVector rand(Float32, 3)) .* p)
monteprob = EnsembleProblem(prob, prob_func = prob_func, safetycopy = false)
@time sol = solve(monteprob, GPUTsit5(), EnsembleGPUKernel(CUDA.CUDABackend()),
    trajectories = 10_000,
    saveat = 1.0f0);

# 0.015064 seconds (257.68 k allocations: 13.132 MiB)

which is about two orders of magnitude faster for computing 10,000 trajectories, note that the major factors are that we cannot define 32-bit floating point values from R and the prob_func for generating the initial conditions and parameters is a major bottleneck since this function is written in R.

To see how this scales in Julia, let’s take it to insane heights. First, let’s reduce the amount we’re saving:

@time sol = solve(monteprob,GPUTsit5(),EnsembleGPUKernel(CUDA.CUDABackend()),trajectories=10_000,saveat=1.0f0)
0.015040 seconds (257.64 k allocations: 13.130 MiB)

This highlights that controlling memory pressure is key with GPU usage: you will get much better performance when requiring less saved points on the GPU.

@time sol = solve(monteprob,GPUTsit5(),EnsembleGPUKernel(CUDA.CUDABackend()),trajectories=100_000,saveat=1.0f0)
# 0.150901 seconds (2.60 M allocations: 131.576 MiB)

compared to serial:

@time sol = solve(monteprob,Tsit5(),EnsembleSerial(),trajectories=100_000,saveat=1.0f0)
# 22.136743 seconds (16.40 M allocations: 1.628 GiB, 42.98% gc time)

And now we start to see that scaling power! Let’s solve 1 million trajectories:

@time sol = solve(monteprob,GPUTsit5(),EnsembleGPUKernel(CUDA.CUDABackend()),trajectories=1_000_000,saveat=1.0f0)
# 1.031295 seconds (3.40 M allocations: 241.075 MiB)

For reference, let’s look at deSolve with the change to only save that much:

times      <- seq(0, 100, by = 1.0)
lorenz_solve <- function (i){
  state      <- c(X = runif(1), Y = runif(1), Z = runif(1))
  parameters <- c(a = -8/3 * runif(1), b = -10 * runif(1), c = 28 * runif(1))
  out <- ode(y = state, times = times, func = Lorenz, parms = parameters)
}

system.time({ lapply(1:1000,lorenz_solve) })

   user  system elapsed 
  49.69    3.36   53.42 

The GPU version is solving 1000x as many trajectories, 50x as fast! So conclusion, if you need the most speed, you may want to move to the Julia version to get the most out of your GPU due to Float32’s, and when using GPUs make sure it’s a problem with a relatively average or low memory pressure, and these methods will give orders of magnitude acceleration compared to what you might be used to.