Quick Start

tidysq package is meant to store and conduct operations on biological sequences. This vignette provides a guide to basic usage of tidysq, i.e. reading, manipulating and writing sequences to file.

The most recent version of tidysq can be installed with install_github() function from devtools.

# devtools::install_github("BioGenies/tidysq")
library(tidysq)

Sequence creation

Biological sequences can be and often are represented as strings – sequences of letters. For example, a DNA sequence can take the form of "TAGGCCCTAGACCTG", where A means adenine, C – cytosine, G – guanine and T – thymine. Exact IUPAC recommendations for one-letter codes can be found here.

Within tidysq package sequence data is stored in sq objects, that is, vectors of biological sequences. They can be created from string vectors as above:

sq_dna <- sq(c("TAGGCCCTAGACCTG", "TAGGCCCTGGGCATG"))
sq_dna
#> basic DNA sequences list:
#> [1] TAGGCCCTAGACCTG                                                         <15>
#> [2] TAGGCCCTGGGCATG                                                         <15>

There are several thing to note. First, each sequence is an element of sq object. Many operations are vectorized — they are applied to all sequences of a vector — and sq objects are no different in this regard. Second, the first line of output says: basic DNA sequences list. This means that all sequences of this object are of DNA type and do not use ambiguous letters (more about that in “Advanced alphabet techniques” vignette).

Subsetting sequences

Manipulating sequence objects is an integral part of tidysq. sq objects can be easily subsetted using usual R syntax:

sq_dna[1]
#> basic DNA sequences list:
#> [1] TAGGCCCTAGACCTG                                                         <15>

Extracting subsequences is a bit more complicated than that — because it uses designated function bite(). Its syntax, however, closely resembles that of base R — indexing starts with one and negative indices are interpreted as “anything except that”. It returns an sq object with all sequences subsetted:

bite(sq_dna, 5:10)
#> basic DNA sequences list:
#> [1] CCCTAG                                                                   <6>
#> [2] CCCTGG                                                                   <6>
bite(sq_dna, c(-9, -11, -13))
#> basic DNA sequences list:
#> [1] TAGGCCCTGCTG                                                            <12>
#> [2] TAGGCCCTGCTG                                                            <12>

It’s possible to reverse sequences using this function:

# Don't do it like that!
bite(sq_dna, 15:1)
#> basic DNA sequences list:
#> [1] GTCCAGATCCCGGAT                                                         <15>
#> [2] GTACGGGTCCCGGAT                                                         <15>

However, this usage is strongly discouraged, because it’s both ineffective and works badly with sequences of different lengths. Instead, there is a designated function reverse():

reverse(sq_dna)
#> basic DNA sequences list:
#> [1] GTCCAGATCCCGGAT                                                         <15>
#> [2] GTACGGGTCCCGGAT                                                         <15>

Note that it is very different to base rev(), which reverses only the order of sequences, not letters:

rev(sq_dna)
#> basic DNA sequences list:
#> [1] TAGGCCCTGGGCATG                                                         <15>
#> [2] TAGGCCCTAGACCTG                                                         <15>

We can combine two or more sq objects using base c() function:

sq_dna <- c(sq_dna, reverse(sq_dna))
sq_dna
#> basic DNA sequences list:
#> [1] TAGGCCCTAGACCTG                                                         <15>
#> [2] TAGGCCCTGGGCATG                                                         <15>
#> [3] GTCCAGATCCCGGAT                                                         <15>
#> [4] GTACGGGTCCCGGAT                                                         <15>

Biological interpretation

tidysq offers two functions specific to DNA/RNA sequences, namely complement() and translate(). The former creates sequences with complementary bases, that is, replaces A with T, C with G and vice versa. The latter translates input to amino acid sequences using the translation table with three-letter codons.

These functions can be called as shown below:

complement(sq_dna)
#> basic DNA sequences list:
#> [1] ATCCGGGATCTGGAC                                                         <15>
#> [2] ATCCGGGACCCGTAC                                                         <15>
#> [3] CAGGTCTAGGGCCTA                                                         <15>
#> [4] CATGCCCAGGGCCTA                                                         <15>
translate(sq_dna)
#> basic amino acid sequences list:
#> [1] *ALDL                                                                    <5>
#> [2] *ALGM                                                                    <5>
#> [3] VQIPD                                                                    <5>
#> [4] VRVPD                                                                    <5>

One noteworthy feature here is that translation can be done with any genetic code table of those listed on this Wikipedia page:

translate(sq_dna, table = 6)
#> basic amino acid sequences list:
#> [1] QALDL                                                                    <5>
#> [2] QALGM                                                                    <5>
#> [3] VQIPD                                                                    <5>
#> [4] VRVPD                                                                    <5>

Finding motifs

Motifs are short subsequences. These are often searched for in biological sequences. tidysq has two distinct functions that allow the user to perform such search.

One of them is a %has% operator that takes sq object and character vector as parameters respectively. It returns a logical vector of the same length as sq object, where each element says whether all motifs passed as strings were found in given sequence:

sq_dna %has% "ATC"
#> [1] FALSE FALSE  TRUE FALSE
# It can be used to subset sq
sq_dna[sq_dna %has% c("AG", "CC")]
#> basic DNA sequences list:
#> [1] TAGGCCCTAGACCTG                                                         <15>
#> [2] TAGGCCCTGGGCATG                                                         <15>
#> [3] GTCCAGATCCCGGAT                                                         <15>

It says nothing about motif placement within sequence nor it exact form, however. In this case, there is find_motifs() function that returns a whole tibble (from tibble package; basically improved version of data.frame) with various info about found motifs. Important thing to note here is that the second argument is a character vector of sequence names to avoid embedding potentially long sequences in resulting tibble potentially many times:

find_motifs(sq_dna, c("seq1", "seq2", "rev1", "rev2"), c("ATC", "TAG"))
#> # A tibble: 4 × 5
#>   names found     sought start   end
#>   <chr> <dna_bsc> <chr>  <int> <int>
#> 1 rev1  ATC   <3> ATC        7     9
#> 2 seq1  TAG   <3> TAG        1     3
#> 3 seq1  TAG   <3> TAG        8    10
#> 4 seq2  TAG   <3> TAG        1     3

There are ambiguous DNA bases in IUPAC codes and these can be used in motifs. One of them is "N" — its meaning is “any of A, C, G or T:

find_motifs(sq_dna, c("seq1", "seq2", "rev1", "rev2"), "GNCC")
#> # A tibble: 7 × 5
#>   names found     sought start   end
#>   <chr> <dna_bsc> <chr>  <int> <int>
#> 1 seq1  GGCC  <4> GNCC       3     6
#> 2 seq1  GCCC  <4> GNCC       4     7
#> 3 seq1  GACC  <4> GNCC      10    13
#> 4 seq2  GGCC  <4> GNCC       3     6
#> 5 seq2  GCCC  <4> GNCC       4     7
#> 6 rev1  GTCC  <4> GNCC       1     4
#> 7 rev2  GTCC  <4> GNCC       7    10

This example displays the difference between "sought" and "found" columns. The former contains the string representation of motif that the user was looking for, while the latter contains a tidysq-encoded sequence with an “instance” of motif.

Two additional characters are reserved because of their special meaning in motifs. "^" means that this motif must be found at the start of a sequence, while "$" means the same, but with the end instead. They can be mixed with ambiguous letters, of course:

find_motifs(sq_dna, c("seq1", "seq2", "rev1", "rev2"), c("^TAG", "ATN$"))
#> # A tibble: 3 × 5
#>   names found     sought start   end
#>   <chr> <dna_bsc> <chr>  <int> <int>
#> 1 seq1  TAG   <3> ^TAG       1     3
#> 2 seq2  TAG   <3> ^TAG       1     3
#> 3 seq2  ATG   <3> ATN$      13    15

Exporting sq objects

After doing computations the user might wish to save their sequences for future use. One of the most popular formats for storing biological sequences is FASTA. tidysq allows the user to write sequences to FASTA file with write_fasta() function. Important thing to remember here is that it has to be passed name parameter, analogous to that present in find_motifs():

write_fasta(sq_dna,
            c("seq1", "seq2", "rev1", "rev2"),
            "just_your_ordinary_fasta_file.fasta")